CriticalCO₂ Transcritical
CO2 Gas Detection / Leak Alarm
A CO2 gas-detection alarm in the plant room or sales area signals a leak. CO2 is heavier than air, colorless, and odorless — rising ppm is an asphyxiation risk and must be treated as a safety event, not just a refrigerant loss.
Symptoms
- Gas-detection controller in warning (~5,000 ppm) or alarm/evacuate (~15,000-30,000 ppm)
- Repeated charge loss / low-charge alarms on the rack
- Frost or hissing at a fitting; sensor in a low/pit area alarming first
Unlock the full fix
Likely causes, step-by-step troubleshooting & safety notes
Get the complete diagnostic guide for CO2 Gas Detection / Leak Alarm — plus the full fault library, guided diagnostics, AI + photo diagnose, and CO₂ & R-290 reference. Start free, no card needed.
Related faults